Industry News

Ballscrew Doctor

Views : 68
Author : longzhichuang
Update time : 2021-01-08 22:29:42
Failure mode:Flaking
Flaking is a typical fatigue failure. Shear stress causes initial crack under the surface of thread,and alrernative contact stress extending cracks to the surface. Material flaking creates holes on the thread surface.

Root cause:
Over loading reaches the fatigue life of material.

Failure mode:Rust and corrosion
Water base liquid, high humidity or high temperature difference environment would cause the material surface get rust, and rust will increase through time.

Root cause:
high humidity environment, water base liquid mixture, anti-rust protection fail.

Failure mode:Overheat and burn marks
Overloading or poor lubrication condition generate abnormal frictional heat, causeing overheat and burn marks on the thread surface.

Root cause:
Lubricant fail, overloading

Failure mode:Cracks
Overloading condition leads to poor circulation of rolling element.The excessive or concentrated load and stress causes wear and cracks on the surface.

Root cause:
excessive impact force, poor circulation

Failure mode:Shaft end fracture
Shaft end bears repeated bending stress during rotating casuing the intial crack start from A→B→C.

Root cause:
Misalignment or insufficient shaft end rigidity

Failure mode:Dust intrusion
Dust particle get into ballscrew causing poor circulation.

Root cause:
Particle size is smaller than dust proof protection.

Failure mode:Water or coolant intrusion
Cutting fliud, or coolant fluid is not compatible with lubricant, causeing deterioration of the lubricant.

Root cause:
lubricant deterioration, protection fail, pipe leaking
Related News
Axial clearance of the ball screw Axial clearance of the ball screw
Sep .09.2019
Understanding the axial clearance parameters of precision ball screws
Carved CNC ball screw Carved CNC ball screw
Aug .21.2019
The general-purpose CNC standard specification is 2005 ball screw, and the grinding ball screw with C5 or higher precision is selecte-d according to the requirements of equipment precision.
How to make the ball screw better? How to make the ball screw better?
Aug .21.2019
The production of key components of CNC machine tools such as CNC system, spindle unit, ball screw pair and rolling guide pair is relatively lagging behind, the variety is small, the degree of industrialization is low, the level of technology is not high,